Superhydrophobic/ superoleophilic polystyrene-based porous material with superelasticity for highly efficient and continuous oil/water separation in harsh environments.

Three-dimensional separation materials with robust physical/chemical stability have great demand for effective and continuous separation of immiscible oil/water mixtures and water-in-oil emulsions, resulting from chemical leakages and discharge of industrial oily wastewaters. Herein, a superelastic polystyrene-based porous material with superhydrophobicity/superoleophilicity was designed and prepared by high internal phase emulsion polymerization to meet the aforementioned requirements. A flexible and hydrophobic aminopropyl terminated polydimethylsiloxane (NH2-PDMS-NH2) segment was introduced into the rigid styrene-divinylbenzene copolymer through 1, 4-conjugate addition reaction with trimethylolpropane triacrylate. The addition of NH2-PDMS-NH2 simultaneously improved the mechanical and hydrophobic properties of the porous material (the water contact angle from 141.2° to 152.2°). The material exhibited outstanding reversible compressibility (80% strain, even in liquid N2 environments) and superhydrophobic stability, even after being repeatedly compressed 100 times, water contact angle still remained above 150°. Meanwhile, the as-prepared material had outstanding hydrophobic stability in corrosive solutions (strong acidic, alkaline, high-salty, and even strong polar solvent), presence of mechanical interference, strong UV radiations, and high/low temperature environments. More importantly, the material could continuously and efficiently separate immiscible oil/water mixture and water-in-oil emulsions under the above conditions, showing huge potential for the large-scale remediation of complex oily wastewaters.

A study of extractive summarization of long documents incorporating local topic and hierarchical information.

In recent years, the transformer-based language models have achieved remarkable success in the field of extractive text summarization. However, there are still some limitations in this kind of research. First, the transformer language model usually regards the text as a linear sequence, ignoring the inherent hierarchical structure information of the text. Second, for long text data, traditional extractive models often focus on global topic information, which poses challenges in how they capturing and integrating local contextual information within topic segments. To address these issues, we propose a long text extractive summarization model that employs a local topic information extraction module and a text hierarchical extraction module to capture the local topic information and document's hierarchical structure information of the original text. Our approach enhances the ability to determine whether a sentence belongs to the summary. In this experiment, ROUGE score is used as the experimental evaluation index, and evaluates the model on three large public datasets. Through experimental validation, the model demonstrates superior performance in terms of ROUGE-1, ROUGE-2, and ROUGE-L scores compared to current mainstream summarization models, affirming the effectiveness of incorporating local topic information and document hierarchical structure into the model.

Regulation of π-π interactions between single aromatic molecules by bias voltage.

π-stacking interaction, as a fundamental type of intermolecular interaction, plays a crucial role in generating new functional molecules, altering the optoelectronic properties of materials, and maintaining protein structural stability. However, regulating intermolecular π-π interactions at the single-molecule level without altering the molecular conformation as well as the chemical properties remains a significant challenge. To this end, via conductance measurement with thousands of single molecular junctions employing a series of aromatic molecules, we demonstrate that the π-π coupling between neighboring aromatic molecules with rigid structures in a circuit can be greatly enhanced by increasing the bias voltage. We further reveal that this universal regulating effect of bias voltage without molecular conformational variation originates from the increases of the molecular dipole upon an applied electric field. These findings not only supply a non-destructive method to regulate the intermolecular interactions offering an approach to modulate the electron transport through a single molecular junction, but also deepen the understanding of the mechanism of π-π interactions.

Carexlinanensis (sect. Mitratae), a new species of Cyperaceae from Zhejiang, East China.

Carexlinanensis X.D.Qiu & X.F.Jin, a new species in sect. Mitratae of the sedge family (Cyperaceae) from north-western Zhejiang is described and illustrated. We performed a statistical comparison of the new species with other closely-related species from the same section. Carexlinanensis is similar to Carexsachalinensis F.Schmidt, but differs in having leaf blades 1-2 mm wide (vs. 2.5-3.5 mm wide), utricles longer than pistillate glumes, with beak margin smooth (vs. barbate) and peduncles of lateral spikes enclosed in bract sheaths (vs. exserted from bract sheaths).

Safety and efficacy of a programmed cell death 1 inhibitor combined with oxaliplatin plus S-1 in patients with Borrmann large type III and IV gastric cancers.

BACKGROUND: Gastric cancer (GC) is the fifth most common and the fourth most lethal malignant tumour in the world. Most patients are already in the advanced stage when they are diagnosed, which also leads to poor overall survival. The effect of postoperative adjuvant chemotherapy for advanced GC is unsatisfactory with a high rate of distant metastasis and local recurrence. AIM: To investigate the safety and efficacy of a programmed cell death 1 (PD-1) inhibitor combined with oxaliplatin and S-1 (SOX) in the treatment of Borrmann large type III and IV GCs. METHODS: A retrospective analysis (IRB-2022-371) was performed on 89 patients with Borrmann large type III and IV GCs who received neoadjuvant therapy (NAT) from January 2020 to December 2021. According to the different neoadjuvant treatment regimens, the patients were divided into the SOX group (61 patients) and the PD-1 + SOX (P-SOX) group (28 patients). RESULTS: The pathological response (tumor regression grade 0/1) in the P-SOX group was significantly higher than that in the SOX group (42.86% vs 18.03%, P = 0.013). The incidence of ypN0 in the P-SOX group was higher than that in the SOX group (39.29% vs 19.67%, P = 0.05). The use of PD-1 inhibitors was an independent factor affecting tumor regression grade. Meanwhile, the use of PD-1 did not increase postoperative complications or the adverse effects of NAT. CONCLUSION: A PD-1 inhibitor combined with SOX could significantly improve the rate of tumour regression during NAT for patients with Borrmann large type III and IV GCs.

Development of an attenuated potato virus Y mutant carrying multiple mutations in helper-component protease for cross-protection.

Tobacco (Nicotiana tabacum) is one of the major cash crops in China. Potato virus Y (PVY), a representative member of the genus Potyvirus, greatly reduces the quality and yield of tobacco leaves by inducing veinal necrosis. Mild strain-mediated cross-protection is an attractive method of controlling diseases caused by PVY. Currently, there is a lack of effective and stable attenuated PVY mutants. Potyviral helper component-protease (HC-Pro) is a likely target for the development of mild strains. Our previous studies showed that the residues lysine at positions 124 and 182 (K124 and K182) in HC-Pro were involved in PVY virulence, and the conserved KITC motif in HC-Pro was involved in aphid transmission. In this study, to improve the stability of PVY mild strains, K at position 50 (K50) in KITC motif, K124, and K182 were separately substituted with glutamic acid (E), leucine (L), and arginine (R), resulting in a triple-mutant PVY-HCELR. The mutant PVY-HCELR had attenuated virulence and did not induce leaf veinal necrosis symptoms in tobacco plants and could not be transmitted by Myzus persicae. Furthermore, PVY-HCELR mutant was genetically stable after six serial passages, and only caused mild mosaic symptoms in tobacco plants even at 90 days post inoculation. The tobacco plants cross-protected by PVY-HCELR mutant showed high resistance to the wild-type PVY. This study showed that PVY-HCELR mutant was a promising mild mutant for cross-protection to control PVY.

[Effect of printing orientation on physical and mechanical properties of 3D printing prosthodontic base resin materials].

OBJECTIVE: To analyze the influence of forming direction on the surface characteristics, elastic modulus, bending strength and fracture toughness of printed parts and the relationship between forming direction and force direction, and to provide scientific basis and guidance for the clinical application of oral denture base resin materials. METHODS: The 3D printing technology was used to print denture base resin samples. The shape and size of the samples referred to the current standard for testing conventional denture base materials. The samples used for physical performance testing were cylindrical (with a diameter of 15 mm and a thickness of 1 mm) and printed at different angles along the Z axis (0°, 45°, 90°). Scanning electron microscope was used to observe the microscopic topography of the different samples. The color stability of different samples was observed by color stabilizer. The surface roughness of the samples was analyzed by using surface roughness tester. The Vickers hardness was measured to analyze the hardness of the samples. The samples used for mechanical performance testing were rectangular (elastic modulus and bending strength: A length of 64 mm, a width of 10 mm, and a height of 3.3 mm; fracture toughness: A length of 39 mm, a width of 8 mm, and a height of 4 mm), divided into two groups: W group and H group. The W group was printed from the bottom up along the Z axis with the length × width as the bottom surface parallel to the X, Y axis plane, while the H group printed from the bottom up along the Z axis with the length × height as the bottom surface parallel to the X, Y axis plane. The forming angles of both groups were equally divided into 0°, 45°, and 90°. The elastic modulus, bending strength and fracture toughness of different samples were studied through universal mechanical testing machine. SPSS 22.0 software was used for statistical analysis. RESULTS: The microscopic topography and roughness of different samples were closely related to the printing direction, with significant differences between the 0°, 45°, and 90° specimens. The 0° specimens had the smoothest surface (roughness < 1 µm). The surface of the 45° specimen was the roughest (roughness>3 µm). The microhardness of the 0° sample was the best [(196.13±0.20) MPa], with a significant difference compared with the 90° sample [(186.62±4.81) MPa, P < 0.05]. The mechanical properties of different samples were also closely related to the printing direction. The elastic modulus, bending strength, and fracture toughness of the 45° samples in the W group were the highest compared with the other groups. The results of elastic modulus showed that in the H group, the 45° specimens had the highest elastic mo-dulus, which was significantly different from the 0° and 90° specimens (P < 0.05). The elastic modulus of 0° and 45° specimens in the W group were higher than those in 90° specimens (P < 0.05). The bending strength results showed that there was no significant difference between the specimens from dif-ferent angles in the H group. The bending strength of the 90° specimens in the W group was the smallest, and there was a significant difference between 90° and the 0° and 45° specimens (P < 0.05); And the bendind strength of the 0° and 45° specimens in the W group was significantly higher than that of the 0° and 45° specimens in the H group (P < 0.05). The fracture toughness results showed that the fracture toughness of the H group specimens was lower than 1.9 MPa m1/2, which was specified in the denture base standard. The 45° samples in the W group were the highest, with significant differences compared with the 0° and 90° samples (P < 0.05). And the 90° samples of the W group specimens were lower than 1.9 MPa m1/2. And the fracture toughness of the 45° specimen in the W group was significantly higher than that of all the specimens in the H group (P < 0.05). CONCLUSION: The 0° samples had relatively better physical properties. The 45° samples had the best mechanical properties. But the fracture toughness of specimens (H group and 90° samples of W group) did not yet meet clinical requirements. That indicated that the characteristics of the 3D printing denture base resin were affected by the printing direction. Only when the performance of the printed samples in all directions met the minimum requirements of the standard, they could be used in clinical practice.

Characterization of biliary and duodenal microbiota in patients with primary and recurrent choledocholithiasis.

Purpose: To explore the biliary and duodenal microbiota features associated with the formation and recurrence of choledocholithiasis (CDL). Methods: We prospectively recruited patients with primary (P-CDL, n = 29) and recurrent CDL (R-CDL, n = 27) for endoscopic retrograde cholangiopancreatography (ERCP). Duodenal mucosa (DM), bile and bile duct stones (BDS) samples were collected in P- and R-CDL patients. DM samples were also collected in 8 healthy controls (HC). The microbiota profile analysis was performed with 16S rRNA gene sequencing. Results: Short-course antibiotic application before ERCP showed no significant effects in alpha and beta diversities of the biliary and duodenal microbiota in CDL. Alpha diversity showed no difference between DM and bile samples in CDL. The duodenal microbial richness and diversity was lower in both P- and R-CDL than HC. The biliary microbiota composition showed a high similarity between P- and R-CDL. Fusobacterium and Enterococcus were higher abundant in DM, bile, and BDS samples of R-CDL than P-CDL, as well as Escherichia and Klebsiella in bile samples of R-CDL. The enriched duodenal and biliary bacteria in CDL were closely associated with cholecystectomy, inflammation and liver dysfunction. The bile-associated microbiota of R-CDL expressed enhanced capacity of D-glucuronide and D-glucuronate degradation, implicating an elevated level of ß-glucuronidase probably produced by enriched Escherichia and Klebsiella in bile. Conclusions: The duodenal microbiota was in an imbalance in CDL. The duodenal microbiota was probably the main source of the biliary microbiota and was closely related to CDL formation and recurrence. Enterococcus, Fusobacterium, Escherichia and Klebsiella might contribute to CDL recurrence. Clinical trials: The study was registered at the Chinese Clinical Trial Registry (https://www.chictr.org.cn/index.html, ChiCTR2000033940). Supplementary Information: The online version contains supplementary material available at 10.1007/s13755-023-00267-2.

The classical D1 dopamine receptor antagonist SCH23390 is a functional sigma-1 receptor allosteric modulator.

SCH23390 is a widely used D1 dopamine receptor (D1R) antagonist that also elicits some D1R-independent effects. We previously found that the benzazepine, SKF83959, an analog of SCH23390, produces positive allosteric modulation of the Sigma-1 receptor (Sig1R). SCH23390 does not bind to the orthodoxic site of Sig1R but enhances the binding of 3H (+)-pentazocine to Sig1R. In this study, we investigated whether SCH23390 functions as an allosteric modulator of Sig1R. We detected increased Sig1R dissociation from binding immunoglobulin protein (BiP) and translocation of Sig1R to the plasma membrane in response to SCH23390 in transfected HEK293T and SH-SY5Y cells, respectively. Activation of Sig1R by SCH23390 was further confirmed by inhibition of GSK3ß activity in a time- and dose-dependent manner; this effect was blocked by pretreatment with the Sig1R antagonist, BD1047, and by knockdown of Sig1R. SCH23390 also inhibited GSK3ß in wild-type mice but not in Sig1R knockout mice. Finally, we showed that SCH23390 allosterically modulated the effect of the Sig1R agonist SKF10047 on inhibition of GSK3ß. This positive allosteric effect of SCH23390 was further confirmed via promotion of neuronal protection afforded by SKF10047 in primary cortical neurons challenged with MPP+. These results provide the first evidence that SCH23390 elicits functional allosteric modulation of Sig1R. Our findings not only reveal novel pharmacological effects of SCH23390 but also indicate a potential mechanism for SCH23390-mediated D1R-independent effects. Therefore, attention should be paid to these Sig1R-mediated effects when explaining pharmacological responses to SCH23390.

Blocking Ubiquitin-Specific Protease 7 Induces Ferroptosis in Gastric Cancer via Targeting Stearoyl-CoA Desaturase.

Gastric cancer (GC) presents a formidable global health challenge, and conventional therapies face efficacy limitations. Ubiquitin-specific protease 7 (USP7) plays pivotal roles in GC development, immune response, and chemo-resistance, making it a promising target. Various USP7 inhibitors have shown selectivity and efficacy in preclinical studies. However, the mechanistic role of USP7 has not been fully elucidated, and currently, no USP7 inhibitors have been approved for clinical use. In this study, DHPO is identified as a potent USP7 inhibitor for GC treatment through in silico screening. DHPO demonstrates significant anti-tumor activity in vitro, inhibiting cell viability and clonogenic ability, and preventing tumor migration and invasion. In vivo studies using orthotopic gastric tumor mouse models validate DHPO's efficacy in suppressing tumor growth and metastasis without significant toxicity. Mechanistically, DHPO inhibition triggers ferroptosis, evidenced by mitochondrial alterations, lipid Reactive Oxygen Species (ROS), Malondialdehyde (MDA) accumulation, and iron overload. Further investigations unveil USP7's regulation of Stearoyl-CoA Desaturase (SCD) through deubiquitination, linking USP7 inhibition to SCD degradation and ferroptosis induction. Overall, this study identifies USP7 as a key player in ferroptosis of GC, elucidates DHPO's inhibitory mechanisms, and highlights its potential for GC treatment by inducing ferroptosis through SCD regulation.

RUNX1 C-terminal Mutations Impair Blood Cell Differentiation by Perturbing Specific Enhancer-Promoter Networks.

The transcription factor RUNX1 is a master regulator of hematopoiesis and is frequently mutated in myeloid malignancies. Mutations in its runt homology domain (RHD) frequently disrupt DNA binding and result in loss of RUNX1 function. However, it is not clearly understood how other RUNX1 mutations contribute to disease development. Here, we characterize RUNX1 mutations outside of the RHD. Our analysis of patient datasets revealed that mutations within the C-terminus frequently occur in hematopoietic disorders. Remarkably, most of these mutations were nonsense or frameshift and predicted to be exempt from nonsense mediated mRNA decay. Therefore, this class of mutation is projected to produce DNA-binding proteins that contribute to pathogenesis in a distinct manner. To model this, we introduced the RUNX1R320* mutation into the endogenous gene locus and demonstrated the production of RUNX1R320* protein. Expression of RUNX1R320* resulted in the disruption of RUNX1 regulated processes such as megakaryocytic differentiation through a transcriptional signature different from RUNX1 depletion. To understand the underlying mechanisms, we utilized Global RNA Interactions with DNA by deep sequencing (GRID-seq) to examine enhancer-promoter connections. We identified wide-spread alteration of enhancer-promoter networks within RUNX1 mutant cells. Additionally, we uncovered enrichment of RUNX1R320* and FOXK2 binding at the MYC super enhancer locus, significantly upregulating MYC transcription and signaling pathways. Together, our study demonstrates that most RUNX1 mutations outside the DNA binding domain are not subject to nonsense mediated decay, producing protein products that act in concert with additional cofactors to dysregulate hematopoiesis through mechanisms distinct from that induced by RUNX1 depletion.

A retrospective study of occlusal reconstruction in patients with old jaw fractures and dentition defects.

PURPOSE: This study evaluated the methods and clinical effects of multidisciplinary collaborative treatment for occlusal reconstruction in patients with old jaw fractures and dentition defects. METHODS: Patients with old jaw fractures and dentition defects who underwent occlusal reconstruction at the Third Affiliated Hospital of Air Force Military Medical University from January 2018 to December 2022 were enrolled. Clinical treatment was classified into 3 phases. In phase I, techniques such as orthognathic surgery, microsurgery, and distraction osteogenesis were employed to reconstruct the correct three-dimensional (3D) jaw position relationship. In phase II, bone augmentation and soft tissue management techniques were utilized to address insufficient alveolar bone mass and poor gingival soft tissue conditions. In phase III, implant-supported overdentures or fixed dentures were used for occlusal reconstruction. A summary of treatment methods, clinical efficacy evaluation, comparative analysis of imageological examinations, and satisfaction questionnaire survey were utilized to evaluate the therapeutic efficacy in patients with traumatic old jaw fractures and dentition defects. All data are summarized using the arithmetic mean and standard deviation and compared using independent sample t-tests. RESULTS: In 15 patients with old jaw fractures and dentition defects (an average age of 32 years, ranging from 18 to 53 years), there were 7 cases of malocclusion of single maxillary fracture, 6 of malocclusion of single mandible fracture, and 2 of malocclusion of both maxillary and mandible fractures. There were 5 patients with single maxillary dentition defects, 2 with single mandibular dentition defects, and 8 with both maxillary and mandibular dentition defects. To reconstruct the correct 3D jaw positional relationship, 5 patients underwent Le Fort I osteotomy of the maxilla, 3 underwent bilateral sagittal split ramus osteotomy of the mandible, 4 underwent open reduction and internal fixation for old jaw fractures, 3 underwent temporomandibular joint surgery, and 4 underwent distraction osteogenesis. All patients underwent jawbone augmentation, of whom 4 patients underwent a free composite vascularized bone flap (26.66%) and the remaining patients underwent local alveolar bone augmentation. Free gingival graft and connective tissue graft were the main methods for soft tissue augmentation (73.33%). The 15 patients received 81 implants, of whom 11 patients received implant-supported fixed dentures and 4 received implant-supported removable dentures. The survival rate of all implants was 93.82%. The final imageological examination of 15 patients confirmed that the malocclusion was corrected, and the clinical treatment ultimately achieved occlusal function reconstruction. The patient satisfaction questionnaire survey showed that they were satisfied with the efficacy, phonetics, aesthetics, and comfort after treatment. CONCLUSION: Occlusal reconstruction of old jaw fractures and dentition defects requires a phased sequential comprehensive treatment, consisting of 3D spatial jaw correction, alveolar bone augmentation and soft tissue augmentation, and implant-supported occlusal reconstruction, achieving satisfactory clinical therapeutic efficacy.

Super-Flexible Water-Proof Actuators.

Humidity-responsive materials hold broad application prospects in sensing, energy production, and other fields. Particularly, humidity-sensitive, flexibility, and water resistance are pivotal factors in the development of optimized humidity-responsive materials. In this study, hydrophobic linear polyurethane and hydrophilic 4-vinylphenylboronic acid (4-VPBA) form a semi-intercross cross-linking network. This copolymer of polyurethane exhibits excellent humidity-sensitive, mechanical properties, and water resistance. Its maximum tensile strength and maximum elongation can reach 40.56 MPa and 543.47%, respectively. After being immersed in water at various temperatures for 15 days, it exhibited a swelling ratio of only 3.28% in water at 5 °C and 9.58% in water at 70 °C. While the presence of 4-VPBA network imparts humidity-sensitive, reversible, and multidirectional bending abilities, under the stimulus of water vapor, it can bend 43° within 1.4 s. The demonstrated material surpasses current bidirectional humidity actuators in actuating ability. Based on these characteristics, automatically opening waterproof umbrellas and windows, as well as bionic-arms, crawling robots, and self-propelled boats, are successfully developed.

NRG1-ErbB4 signaling in the medial amygdala controls mating motivation in adult male mice.

Motivation-driven mating is a basic affair for the maintenance of species. However, the underlying molecular mechanisms that control mating motivation are not fully understood. Here, we report that NRG1-ErbB4 signaling in the medial amygdala (MeA) is pivotal in regulating mating motivation. NRG1 expression in the MeA negatively correlates with the mating motivation levels in adult male mice. Local injection and knockdown of MeA NRG1 reduce and promote mating motivation, respectively. Consistently, knockdown of MeA ErbB4, a major receptor for NRG1, and genetic inactivation of its kinase both promote mating motivation. ErbB4 deletion decreases neuronal excitability, whereas chemogenetic manipulations of ErbB4-positive neuronal activities bidirectionally modulate mating motivation. We also identify that the effects of NRG1-ErbB4 signaling on neuronal excitability and mating motivation rely on hyperpolarization-activated cyclic nucleotide-gated channel 3. This study reveals a critical molecular mechanism for regulating mating motivation in adult male mice.

Investigations of the prognostic value of RUNX1 mutation in acute myeloid leukemia patients: Data from a real-world study.

RUNX1 is one of the recurrent mutated genes in newly diagnosed acute myeloid leukemia (AML). Although historically recognized as a provisional distinct entity, the AML subtype with RUNX1 mutations (AML-RUNX1mut) was eliminated from the 2022 WHO classification system. To gain more insight into the characteristics of AML-RUNX1mut, we retrospectively analyzed 1065 newly diagnosed adult AML patients from the First Affiliated Hospital of Soochow University between January 2017 and December 2021. RUNX1 mutations were identified in 112 patients (10.5%). The presence of RUNX1 mutation (RUNX1mut) conferred a lower composite complete remission (CRc) rate (40.2% vs. 58.4%, P＜0.001), but no significant difference was observed in the 5-year overall survival (OS) rate (50.2% vs. 53.9%; HR=1.293; P=0.115) and event-free survival (EFS) rate (51.5% vs. 49.4%; HR=1.487, P=0.089), even within the same risk stratification. Multivariate analysis showed that RUNX1mut was not an independent prognostic factor for OS (HR=1.352, P=0.068) or EFS (HR=1.129, P=0.513). When patients were stratified according to induction regimen, RUNX1mut was an unfavorable factor for CRc both on univariate and multivariate analysis in patients receiving conventional chemotherapy, and higher risk stratification predicted worse OS. In those who received venetoclax plus hypomethylating agents, RUNX1mut was not predictive of CRc and comparable OS and EFS were seen between intermediate-risk and adverse-risk groups. The results of this study revealed that the impact of RUNX1mut is limited. Its prognostic value depended more on treatment and co-occurrent abnormalities. VEN-HMA may abrogate the prognostic impact of RUNX1, which merits a larger prospective cohort to illustrate.

Systemic inflammatory response index is a predictor of prognosis in gastric cancer patients: Retrospective cohort and meta-analysis.

BACKGROUND: The systemic inflammatory response index (SIRI) has been demonstrated to make a significant difference in assessing the prognosis of patients with different solid neoplasms. However, research is needed to ascertain the accuracy and reliability of applying the SIRI to patients who undergo robotic radical gastric cancer surgery. AIM: To validate the applicability of the SIRI in assessing the survival of gastric cancer patients and evaluate the clinical contribution of preoperative SIRI levels to predicting long-term tumor outcomes in patients, who received robotic radical gastric cancer surgery. METHODS: Initially, an exhaustive retrieval was performed in the PubMed, the Cochrane Library, EMBASE, Web of Science, and Scopus databases to identify relevant studies. Subsequently, a meta-analysis was executed on 6 cohort studies identifying the value of the SIRI in assessing the survival of gastric cancer patients. Additionally, the clinical data of 161 patients undergoing robotic radical gastric cancer surgery were retrospectively analyzed to evaluate their clinicopathological characteristics and relevant laboratory indicators. The association between preoperative SIRI levels and 5-year overall survival (OS) and disease-free survival (DFS) was assessed. RESULTS: The findings demonstrated an extensive connection between SIRI values and the outcome of patients with gastric cancer. Preoperative SIRI levels were identified as an independent hazard feature for both OS and DFS among those who received robotic surgery for gastric cancer. SIRI levels in gastric cancer patients were observed to be associated with the presence of comorbidities, T-stage, carcinoembryonic antigen levels, the development of early serious postoperative complications, and the rate of lymph node metastasis. CONCLUSION: SIRI values are correlated with adverse in the gastric cancer population and have the potential to be utilized in predicting long-term oncological survival in patients who undergo robotic radical gastric cancer surgery.